Back to 6.0 Performance Recipes

500+ Support Package

6.0 LS 500+ Support Package.

Use this package to support a cammed or harder-running 6.0 LS with the bearings, oiling, valvetrain, timing, and ring parts that commonly matter once the build moves beyond a basic stock refresh.

Package Parts

Reliability parts for a stronger 6.0 LS foundation.

These parts help support oil control, bearing condition, valvetrain stability, ring seal, and timing reliability. Final sizing should still match the engine condition and machine-shop measurements.

Bearings

King rod and main bearing set

Choose stock size for an uncut crankshaft, or open the undersize options if the crank has been machined. Verify crank journal size before ordering.

Stock size
View undersize options
.010 undersize.020 undersize
1997-2003 1st Design

Dura-Bond CHP-10T LS cam bearing set

Fits 1997-2003 1st Design GM LS blocks where cam bearing positions 1 and 5 housing bores measure 2.3260"-2.3280". Confirm block casting and bore measurement before ordering.

View item
2007+ 2nd Design

CH-25 LS cam bearing set

Fits 2007 and newer GM LS blocks where positions 1 and 5 measure 2.3460"-2.3480". Certain 2003-2006 LS blocks that call for CH-23 may also use CHP-25 or CH-25 style bearings after measurement.

View item
Oiling

High Volume LS oil pump

Oil pump upgrade for LS builds that will see more load, RPM, or horsepower than a basic stock refresh.

View item
Lifters

LS7-style lifter set with guide trays

LS7-style lifter upgrade for cammed LS builds. Replace lifter trays at the same time and confirm compatibility with the camshaft and engine generation.

View item
Pushrods

7.400 inch chromoly LS pushrods

Upgraded chromoly pushrods for LS camshaft and valvetrain support. Verify final pushrod length before ordering.

View item
Valve Springs

PAC Racing PAC-1219 valve springs

Spring upgrade for performance camshaft support. Match spring choice to camshaft lift, installed height, and retainer setup before ordering.

View item
Rocker Arms

Rocker arms with upgraded trunnions

Pre-upgraded rocker arm option for LS valvetrain reliability when the engine will see more RPM, spring pressure, or aggressive camshaft use.

View item
Timing

LS Timing Chain Kit

Timing chain kit for LS rebuild and camshaft support work. Confirm cam gear style, engine generation, and timing setup before ordering.

View item
Rings

LS piston rings for LQ4 and LQ9

Piston ring option for 6.0 LQ4 and LQ9 rebuild planning. Confirm bore size and machine-shop measurements before ordering.

View item
Configured for 6.0L LS 500+ support package planning.

Our Promise

Quality LS parts at a good price.

Champ Motorsports is built around dependable parts, clear LS fitment guidance, and fair pricing. Every recommendation is organized to make LS engine building easier to plan and easier to order correctly.

champmotorsportsinfo@gmail.com Follow @champ_motorsports

As an Amazon Associate, Champ Motorsports may earn from qualifying purchases at no extra cost to you.